07-23-2023, 10:27 PM
Good morning.
I will attempt to describe how I got the Tab S7+ to send midi commands from Mobile Sheets.
1. Ensure tablet & SD90 are switched on and connected together.
2. Set midi channel to 16
3. Open midi device
4. Select your device. Ketron was not listed, so I chose generic.
5. Open configure figure midi connections
6. Once open tap on the arrow next to midi library and select Google usb.
They turn grey for a second then go back to white.
7. This also opens midi input & output ports below. Tap on both and select your device
8. Return to the normal MobileSheets library page.
9. Long press the title that ypu want to insert the midi commands. A blue check mark will appear next to the title.
10. Press edit song on the top bar and the edit page will appear.
11. Press midi in the top right of the page.
12. Press the + sign at the top right of the white box
13. Press the white arrow next to input port & output port this allows you to select your device.
14. Then at command, above MSB, select the bank number for the SD90
0 = Bank 1
8 = Bank 2
16 = Bank 3
24 = Bank 5
Uncheck LSB
Value patch - enter your registration number
((Some systems the numbering starts at zero. Therefore registration 1 would be 0
registration 2 would be 1 and so on.
Send on song load should be on and coloured blue.
Press the test midi command button and the SD90 should change registration.
Press OK.
The screen will show your command (coloured green) in the white box.
Press OK on the top bar and the song library should reappear
14. Repeat for all registrations.
‐-----------------------------------------------------------------------
I have noticed a couple on anomalies though.
1. I can only go up to 127 registrations per bank, however I believe there was a work around for that. If I get it, I will update the post.
2. I have also noticed that if I am selecting a song from say bank 2 and I am already in bank 1, it occassionally picks the wrong title. It is not the end of the world but if anyone had an ideas great.
I hope that I have not missed anything out and also that it is easily understood.
Than you again to all
I will attempt to describe how I got the Tab S7+ to send midi commands from Mobile Sheets.
1. Ensure tablet & SD90 are switched on and connected together.
2. Set midi channel to 16
3. Open midi device
4. Select your device. Ketron was not listed, so I chose generic.
5. Open configure figure midi connections
6. Once open tap on the arrow next to midi library and select Google usb.
They turn grey for a second then go back to white.
7. This also opens midi input & output ports below. Tap on both and select your device
8. Return to the normal MobileSheets library page.
9. Long press the title that ypu want to insert the midi commands. A blue check mark will appear next to the title.
10. Press edit song on the top bar and the edit page will appear.
11. Press midi in the top right of the page.
12. Press the + sign at the top right of the white box
13. Press the white arrow next to input port & output port this allows you to select your device.
14. Then at command, above MSB, select the bank number for the SD90
0 = Bank 1
8 = Bank 2
16 = Bank 3
24 = Bank 5
Uncheck LSB
Value patch - enter your registration number
((Some systems the numbering starts at zero. Therefore registration 1 would be 0
registration 2 would be 1 and so on.
Send on song load should be on and coloured blue.
Press the test midi command button and the SD90 should change registration.
Press OK.
The screen will show your command (coloured green) in the white box.
Press OK on the top bar and the song library should reappear
14. Repeat for all registrations.
‐-----------------------------------------------------------------------
I have noticed a couple on anomalies though.
1. I can only go up to 127 registrations per bank, however I believe there was a work around for that. If I get it, I will update the post.
2. I have also noticed that if I am selecting a song from say bank 2 and I am already in bank 1, it occassionally picks the wrong title. It is not the end of the world but if anyone had an ideas great.
I hope that I have not missed anything out and also that it is easily understood.
Than you again to all