10-07-2023, 05:06 PM
Hello,
Sometimes this can take a bit of trial and error to figure out what isn't working. Please try the following:
1) Open the AirTurn Manager App on your tablet, and see if a firmware update is available for the pedal. If so, install it.
2) If the pedal is currently paired in the bluetooth settings, unpair it and forget the pairing.
3) Put the pedal in mode 1, and hold the power button for 9 seconds (it should blink three times and then you can release).
4) Turn the pedal back on, open MobileSheets and go to Settings->Touch & Pedal Settings->AirTurn Direct Mode. Also make sure you have granted MobileSheets bluetooth access and/or access to nearby devices if you haven't already done so. This is critical for connecting the pedal (you should also go to the main tablet settings->Apps->MobileSheets->Permissions and verify that you've granted the permission and it hasn't been turned off, as that can happen after a while).
5) Turn on the AirTurn support toggle, connect the pedal, then go to Settings->Touch & Pedal Settings->Pedal Actions. Tap the keys field for pedal 1, then tap Clear. Now press the pedal switch. If a key shows up, you are in good shape. Set the action for the pedal and repeat with the keys field for pedal 2.
6) If this doesn't work, close MobileSheets, put the pedal in mode 3, hold the power for 9 seconds again, go to the tablet bluetooth settings, pair the pedal, then go to Settings->Touch & Pedal Settings->Pedal Actions, and try to set the pedal keys again.
Hopefully that will get the pedal working again, either in mode 1 or mode 3. Let me know if you run into issues with this.
Mike
Sometimes this can take a bit of trial and error to figure out what isn't working. Please try the following:
1) Open the AirTurn Manager App on your tablet, and see if a firmware update is available for the pedal. If so, install it.
2) If the pedal is currently paired in the bluetooth settings, unpair it and forget the pairing.
3) Put the pedal in mode 1, and hold the power button for 9 seconds (it should blink three times and then you can release).
4) Turn the pedal back on, open MobileSheets and go to Settings->Touch & Pedal Settings->AirTurn Direct Mode. Also make sure you have granted MobileSheets bluetooth access and/or access to nearby devices if you haven't already done so. This is critical for connecting the pedal (you should also go to the main tablet settings->Apps->MobileSheets->Permissions and verify that you've granted the permission and it hasn't been turned off, as that can happen after a while).
5) Turn on the AirTurn support toggle, connect the pedal, then go to Settings->Touch & Pedal Settings->Pedal Actions. Tap the keys field for pedal 1, then tap Clear. Now press the pedal switch. If a key shows up, you are in good shape. Set the action for the pedal and repeat with the keys field for pedal 2.
6) If this doesn't work, close MobileSheets, put the pedal in mode 3, hold the power for 9 seconds again, go to the tablet bluetooth settings, pair the pedal, then go to Settings->Touch & Pedal Settings->Pedal Actions, and try to set the pedal keys again.
Hopefully that will get the pedal working again, either in mode 1 or mode 3. Let me know if you run into issues with this.
Mike