07-18-2024, 10:11 PM
Hi Mike,
You referred to LocalState\midi_settings.xml and I couldn't find it anywhere on the C drive
This file doesn't exist. I have only ever set the midi connection to the G2
Start point - Windows not talking to the G2 after restarting evertyhing this morning.
Reinstalled MobileSheets, restart Windows FIRST TIME and G2 BUT now have no connection to the Genos 2.
Unplugging the G2 says MIDI Device 2 - Digital Keyboard [3][0] has been detached.
Device manager shows 2 devices - USB Audio 2.0 cannot start (code 10) -see images
The one that cannot start: Details tab USB Audio 2.0
The one that does start: USB Audio Device
Uninstall the defective one leaves the ok device installed
The connection still does not work
Unplug the G2 and both devices disappear
Restart MobileSheets - Error: waiting for registration message
Scan for hardware changes in windows and the good and bad device drivers are back
Update the drivers by searching Microsoft - says that they are both good
Uninstall the drivers and restart windows
WORKING AFTER RESTARTING WINDOWS AGAIN
---------------------------------------
Windows talks to G2 with the same 2 drivers. USB Audio 2 still not started (code 10)
I have copied all the files under 41730Zubersoft.MobileSheets_ys1c8ct2g6ypr in all cases. Will email I can't upload here.
I am out of time to plug in Android again, but perhaps there is enough here for you to be able to progress.
- Andy
You referred to LocalState\midi_settings.xml and I couldn't find it anywhere on the C drive
This file doesn't exist. I have only ever set the midi connection to the G2
Start point - Windows not talking to the G2 after restarting evertyhing this morning.
Reinstalled MobileSheets, restart Windows FIRST TIME and G2 BUT now have no connection to the Genos 2.
Unplugging the G2 says MIDI Device 2 - Digital Keyboard [3][0] has been detached.
Device manager shows 2 devices - USB Audio 2.0 cannot start (code 10) -see images
The one that cannot start: Details tab USB Audio 2.0
The one that does start: USB Audio Device
Uninstall the defective one leaves the ok device installed
The connection still does not work
Unplug the G2 and both devices disappear
Restart MobileSheets - Error: waiting for registration message
Scan for hardware changes in windows and the good and bad device drivers are back
Update the drivers by searching Microsoft - says that they are both good
Uninstall the drivers and restart windows
WORKING AFTER RESTARTING WINDOWS AGAIN
---------------------------------------
Windows talks to G2 with the same 2 drivers. USB Audio 2 still not started (code 10)
I have copied all the files under 41730Zubersoft.MobileSheets_ys1c8ct2g6ypr in all cases. Will email I can't upload here.
I am out of time to plug in Android again, but perhaps there is enough here for you to be able to progress.
- Andy