08-28-2024, 11:43 PM
I just did a test with the factory supplied 'all parts' midi template on Genos 1, and the button and it's listening function keep working in MS. So you could temporarily switch to that template for testing if you would like to rule out a Genos MIDI setting.
Nothing special in MobileSheets settings. Device is set to Genos, and the default channel 1 is still used. The most important difference is the fact that I have only one input and one output device selected and you have selected two in each direction.
When I switched from Android to Windows for running MobileSheets, I also had some strange effects in regards to MIDI. The culprit in my case, was the USB hub I was using between Genos and the PC. Once I replaced that, all was fine. If you are using a USB hub as well, I suggest removing it temporarily to test.
Are you sure the USB cable you are using is fine ?
Rudy
Nothing special in MobileSheets settings. Device is set to Genos, and the default channel 1 is still used. The most important difference is the fact that I have only one input and one output device selected and you have selected two in each direction.
When I switched from Android to Windows for running MobileSheets, I also had some strange effects in regards to MIDI. The culprit in my case, was the USB hub I was using between Genos and the PC. Once I replaced that, all was fine. If you are using a USB hub as well, I suggest removing it temporarily to test.
Are you sure the USB cable you are using is fine ?
Rudy
_____________________________________________________
MSI Cubi 5 mini pc with IIyama prolite 24" touchscreen-Windows 11, HP Slate 17-Android 4.4.4, iPad Pro 12.9 gen2-iPadOs16
Yamaha Genos 1, Roland PK-6, Yamaha PSR SX900
MSI Cubi 5 mini pc with IIyama prolite 24" touchscreen-Windows 11, HP Slate 17-Android 4.4.4, iPad Pro 12.9 gen2-iPadOs16
Yamaha Genos 1, Roland PK-6, Yamaha PSR SX900