Yesterday, 02:06 AM
Circling back here, and I appreciate the follow up, Mike!
Having gone through a concert where the second tablet kept cutting out no matter what, I don't think my above analysis is correct. I think the culprit may be elsewhere.
I have a portfolio cover on both. These covers have magnets. I don't have any of the above problems unless the tablets are positioned right next to each other (and I have the orientation locked on the RH table to portrait flipped 180.) I think what is really happening is that the left hand tablet case magnets are triggering the "smart cover" lock option on the RH tablet, thus it thinks the cover has been closed. When I separate the two tablets, I don't have the issue. I have turned off the smart cover option on the second tablet, and that seems to have done the trick.
So, while my above message reported repeatable conditions relating to the Bluetooth connection status, I now think it was the accessory smart cover option turning off the display in error due to my setup position.
Really frustrating, and I'm very hopeful that this will prove to be the problem as it is easily managed. I also know from researching the S9, S10 ultras that they magnet sensors can even be tricked by a cover folded up behind.
Anyway, reporting back, and very grateful for the engagement above!
-Joe
Having gone through a concert where the second tablet kept cutting out no matter what, I don't think my above analysis is correct. I think the culprit may be elsewhere.
I have a portfolio cover on both. These covers have magnets. I don't have any of the above problems unless the tablets are positioned right next to each other (and I have the orientation locked on the RH table to portrait flipped 180.) I think what is really happening is that the left hand tablet case magnets are triggering the "smart cover" lock option on the RH tablet, thus it thinks the cover has been closed. When I separate the two tablets, I don't have the issue. I have turned off the smart cover option on the second tablet, and that seems to have done the trick.
So, while my above message reported repeatable conditions relating to the Bluetooth connection status, I now think it was the accessory smart cover option turning off the display in error due to my setup position.
Really frustrating, and I'm very hopeful that this will prove to be the problem as it is easily managed. I also know from researching the S9, S10 ultras that they magnet sensors can even be tricked by a cover folded up behind.
Anyway, reporting back, and very grateful for the engagement above!
-Joe