04-06-2020, 07:02 PM
(This post was last modified: 04-06-2020, 07:03 PM by Andrew9999.)
I use a Fritz!Box for the Internet router. Under "Permit Access" I configured "Port Sharing" settings. Specifically, I permitted access for TCP port 48,000 only on the PC running MobileSheets, and assigned the same port externally. The Fritz!Box confirmed that the port was shared for this device. I then set up an inbound firewall rule on the PC allowing TCP and all ports for the MobileSheets exe. Then I used my public broadband address (which is static) as the address on a remote tablet attempting to connect using "direct connection". After a time the tablet timed out with the message "unable to connect".