[waltsyd]

I'm going to need more information about your devices and your environment:

1) What versions of MobileSheetsPro are each tablet running? You can find this under Settings->About
2) What types of tablets are you using? 
3) What are the IP addresses of both tablets? You can find this by viewing the WiFi network information on the device. I want to verify both tablets are connected to the network/access point. Make sure that you don't have one tablet connected to a 2.4 gHz network and another to a 5 gHz network, for example. 

Once I know more information, I should hopefully be able to help.

Mike

Strangely, today it worked via wifi! I hadn't changed anything.

I have one Amazon Fire 8 and one Amazon Fire 10.

First I checked that both versions are 3.4.7. They are. Then I checked that they are connected to the same exact wifi network. They are.

Unlike last time, this time when I set up the sync, as soon as I pressed "Create Server", the client showed "Amazon trona". I'm not sure where that name comes from. But when I selected that, the sync started. I hadn't changed anything.

I can't recreate the problem. They are syncing via wifi today.


I still cannot connect with Bluetooth. When I select "Create Server" on the serve and do a search on the client, the client can see the name of the server. But when I select the server ("Amazon Tablet 10"), I get the message "Cannot connect to Amazon Tablet 10".

I'm a bit concerned because at gigs, if I needed to sync libraries, I may not have access to a wifi signal and I would need to use bluetooth. And the tablets are connected via bluetooth so that page turning works on the client, but I cannot get sync to work.