[bumblebee]

I am using Toshiba Thrive 10.1, does anyone know mounting kit that can mount my tablet onto a mic stand

[A moderator might want to create a separate thread from your question]

Did you see this thread?
http://zubersoft.com/mobilesheets/forum/....php?tid=6

You might be interested in either of these:
http://www.mountguys.com/Microphone_Stan...tab001.htm
this one has a short connector arm and is slightly limited with the angle it can rotate up to face up. I can mount it on a boom arm slightly sloping away from me (opposite direction than you would usually set it - meaning backwards just slightly) so the tablet is at the correct angle. I do not use a microphone so just use a mic stand with boom or it can work with a cymbal stand with boom.
Or without the boom, you can stand a little away from it mounted on a straight up mic stand and the angle is ok.

http://www.mountguys.com/Microphone_Stan...tab001.htm
this has an additional (long) arm from the one above so I presume the angle would be more easily set (without needing a boom to increase the angle.) The most useful image at this URL is the one from behind where you can see how it mounts.
Note that this one can mount to the side, so make sure your stand is heavy or has wide legs for stability.

With either, the connector to the mic stand is very wide so it will attach to a cymbal stand or any mic stand or different boom diameters. Although the clamp is a shallow C-shape to go around your stand, it presses against straight metal, so you might want to add a piece of rubber for the opposite side.

There are 8 attachments for the tablet in two sizes (only 4 are used) - short x 4 and a little longer x 4. This is adapts for the length, (shorter side) width of your tablet. Mine attaches with 2 x short and 2 x long.
The mechanism is spring-loaded so this expands to accommodate the exact width and keeps the tablet firmly attached, so you can turn the unit landscape or portrait.