• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tablet on your musicstand
#31
(01-13-2014, 05:09 AM)jeffn1 Wrote: Vago I had a good idea for a stand for a large tablet (without using a full-sized music stand), but it required some DIY work.

http://zubersoft.com/mobilesheets/forum/...452&page=4

Has anyone tried this option with a 13 inch tablet? http://www.amazon.com/Stagg-MUS-ARM-Atta...pd_cp_MI_0

Jeff
Thanks for the idea and the link, but I think you still have to "modify" it to be shure that your heavy tablet won´t tip over.
Reply
#32
Lightbulb 
I use a Hannspree 13" tablet (which is great with Music Sheets). But none of the tablet-to-mic-stand holders are big enough. Moreover, I play piano and often have to use whatever instrument is available at a gig. Most acoustic pianos hold it just fine (including my Kawai), but some don't.

I keep a roll of 1" blue painter's tape in my kit. This is low residue tape, and has always solved the problem of the tablet sliding off the piano.

I play an electric piano/organ with a symphony orchestra, and the tablet fits fine on a regular orchestra music stand. A chorus I accompany has a Roland electric piano with a plastic music stand that bolts on top; it is too slippery for the tablet, and I use the tape to hold it.
Reply
#33
(01-13-2014, 05:09 AM)jeffn1 Wrote: Vago I had a good idea for a stand for a large tablet (without using a full-sized music stand), but it required some DIY work.

http://zubersoft.com/mobilesheets/forum/...452&page=4

Has anyone tried this option with a 13 inch tablet? http://www.amazon.com/Stagg-MUS-ARM-Atta...pd_cp_MI_0

Jeff


I use the stand at http://www.almightstand.com. It's universal, and works well, even with the cover on because my cover flap has magnets, and they help it stay put.

brooski
Reply
#34
I think corrected:

http://www.almightystand.com

Jeff

(05-12-2014, 04:41 AM)brooski Wrote:
(01-13-2014, 05:09 AM)jeffn1 Wrote: Vago I had a good idea for a stand for a large tablet (without using a full-sized music stand), but it required some DIY work.

http://zubersoft.com/mobilesheets/forum/...452&page=4

Has anyone tried this option with a 13 inch tablet? http://www.amazon.com/Stagg-MUS-ARM-Atta...pd_cp_MI_0

Jeff


I use the stand at http://www.almightystand.com. It's universal, and works well, even with the cover on because my cover flap has magnets, and they help it stay put.

brooski

Moderator comment: Incorrect link changed
Reply
#35
maybe this can help:

https://www.indiegogo.com/projects/snap-...36510#home
Reply
#36
Photo 
[Image: 3-1y3z4dYzpfGBRXcDet1xqLLns.png]

Using the stand from www.almightystand.com.  
Reply
#37
I ended up using a standard heavy duty stand, which also allows me to have a small mixer to hand as well (as I usually have three instruments to control).  Details here - http://zubersoft.com/mobilesheets/forum/...p?tid=1672
Graeme

1: Samsung 12.2" SM-P900: Android 5.0.2 
2: eSTAR GRAND HD Quad-Core 4G 10.2": Android 5.1 


Some of my music here - https://www.soundclick.com/graemejaye
Reply
#38
I am using this: http://www.amazon.com/gp/product/B000OR7...UTF8&psc=1
Reply
#39
Another way to to - http://www.thomann.de/gb/millenium_tablet_holder.htm

Tablet: Surface Pro 8, 
Other: Strich BT-FP2, USB-MIDI connection to Kurzweil Forte 7
Reply
#40
I think my main point was, if you already have a stand that is substantial enough to hold a large and heavy tablet (and many will have) there is no need to spend another 40 or 50 $/£ .
Graeme

1: Samsung 12.2" SM-P900: Android 5.0.2 
2: eSTAR GRAND HD Quad-Core 4G 10.2": Android 5.1 


Some of my music here - https://www.soundclick.com/graemejaye
Reply
#41
I have a Tab3 and when it is in it's leather cover, no way it slips of my stand (I have a quite large, stable stand) I guess a larger galaxy Note 12 inch would also stand fine on it.. But the leather cover is a must, the straight edges work as anti slip.

So I do not feel the need for a special tablet stand right now.
Kind regards, Marco

Start using Mobilesheets since Februari 22, 2015
Scanner: Canon MG2450 All in one printer (cheap, but works fine)
Tablet: Samsung Galaxy Tab 3 10.1"
Pedals: AirTurn PED (the new Bluetooth 4.0 (SMART READY) ones)
Member of Amateur bands HET/AlmaarBrass/JRBB, playing trumpet.
Reply
#42
I use a K&M universal so I don't have to use an extra stand. Cleaner stage. Works well for my Note 10.1 and could hold larger tabs.

http://www.musiciansfriend.com/pro-audio...1870555867

sent from Samsung S4 via Tapatalk
Samsung Note 10.1 GT-N8013ZW / iPad Pro / AirTurn BT-105 / AirTurn BT200S-4
Reply
#43
(03-13-2015, 01:25 PM)DTownSMR Wrote: I use a K&M universal so I don't have to use an extra stand. Cleaner stage. Works well for my Note 10.1 and could hold larger tabs.

http://www.musiciansfriend.com/pro-audio...1870555867

sent from Samsung S4 via Tapatalk
Yes, I use it with a Note 12.2 and it works fine.
A little bit expensive, but good.
Reply
#44
(03-13-2015, 04:48 PM)Harry_M Wrote:
(03-13-2015, 01:25 PM)DTownSMR Wrote: I use a K&M universal so I don't have to use an extra stand. Cleaner stage. Works well for my Note 10.1 and could hold larger tabs.

http://www.musiciansfriend.com/pro-audio...1870555867

sent from Samsung S4 via Tapatalk
Yes, I use it with a Note 12.2 and it works fine.
A little bit expensive, but good.

I used to use the K&M.  But, it is not big enough for many of the 13 inch tablets.  And, maybe because I used it with a tablet that just barely fit it (the, now discontinued, Toshiba Excite 13"), I felt if you just touched it, it would break down into its various piaces (causing the tablet to fall).  I am happy with this (pretty much just a smaller version of a regular music stand):  http://www.amazon.com/gp/product/B000OR7...UTF8&psc=1
Reply
#45
Lots has been sayed here about stands, tough i like to share the setup that works for me,
the http://produkte.k-m.de/en/product?info=1...5047cf9673 tablet holder is one of the few holders wide enough for my 12" Surface pro3,

I removed the back cover of the holder and turned the whole thing 1 quarter anti clock wise. Now the side holder is under the tablet.
Eventually I ended up removing the sideholder because it got in the way of the USB connection which i use for my USB Pedal.

This holder can be used with any straight Mic stand, but I fancy this one: http://store.airturn.com/gostand-portabl...let-stand/
The Gostand is the smallest foldeble stand i could find.

As a add-on I removed the top of a cheap music stand thad I had, an welded a adapter like http://www.thomann.de/gb/km_216_reduziergewinde.htm so i can screw this on the mic-stand,
now im always flexible to use either the tablet or paper music. (I had to use this adapter since the Airturn gostand has a 5/8" connection)

All this i can simply hold in one 13" Tablet Backpack like the http://www.thule.com/en/bg/products/bags...5854229729
Surface 3 Pro i5
Airturn Ped
Olds Recording & Super Trombone
Reply




Users browsing this thread:
3 Guest(s)


  Theme © 2014 iAndrew  
Powered By MyBB, © 2002-2024 MyBB Group.