Fairly new user of the app, and so far for just the library management features alone it's been great. I play in a small worship band with a decent-sized repertoire so it sure beats carrying a huge binder of music around!

I have a Korg monologue and have tried to set up program changes on song load, so far with no success. MS will see incoming MIDI from the synth, and I can even use those to trigger things in MS, but sending doesn't do anything.

I have made sure that I have all the Rx MIDI options enabled on the monologue, and it is able to receive MIDI from other apps on my tablet (a Lenovo Tab M10 Plus Gen3), but for some reason nothing sent from MS seems to work.

When I connect it, I do get the prompt and it shows the monologue is connected. I have tried all 4 MIDI device options and both Default and Google drivers, and still the same results -- no trouble receiving MIDI from the monologue but sending doesn't work. Even tried a few different USB cables just to be sure. Unfortunately I don't have any DIN MIDI equipment to test with.

Has anyone had success sending MIDI over USB to a monologue?

Did the way to create a new library change?

The way it is described in the manual does not work for me. I don't see a '+' anywhere. only a list of the current libraries in the "Switch Library" dialog.

I am using MS 3.8.40 (the e-ink version) on a Boox Note 3.

Hi all, just to get it out of the way, I've already reported this to Boox.

So, has anyone else noticed odd behaviour with the Android status bar at the top of the screen since the recent Beta, and now full release, firmware updates?

As I like having the status and nav. bars available I don't use the full screen option in MS, so I see a normally reversed colour (greyscale bar, white print) status and nav. bar.  However, since the firmware... change, if I access the Control Centre screen via the status bar, the print goes black, I change something (like turning the front light on or off, or de/activate WiFi or Bluetooth etc.) the status bar often goes white and the print stays black, until I close the Control Centre when the bar stays white, BUT the print goes back to white also, thus making it unable to be read.
Tap the screen to go into the Control Centre again, and go out again doesn't fix it.
Change a few MS screens until it rewrites the screen and things revert to normal.

I find this somewhat annoying...

Though I don't use it, I also have Fakebook Pro installed and the same thing happens in it.

Thank you

I have used the Connect Tablet function to setup one of my tablet with Mobile Sheets installed before and it works perfectly as a Leader but when I try it just now to set it as a Leader, it is not working.

1. When I tap on Leader and assign it a Device Group Name and then tap OK, the Group name field show "Null" and an the IP address of the tablet shows up

2. When I use another tablet to try and connect to this IP address, it give the error "Failed to connect to 192.168......"

3. I checked the randomized MAC address setup on the tablet that I am trying to setup as Leader and randomized MAC address is not enabled

4. Reversing the role and using the tablet that cannot be setup as a Leader to connect as a follower to the other tablet works OK

5. I tried Importing Settings backup from the other tablet to it but no difference

6. When I test it using Bluetooth, the other tablet see this tablet's Group Name but when I select the name and tap on Join Group, the error "Failed to connect to ...Group Name  " is displayed

7.  Same issue whether I set it to Book mode or not

8. Also when I tap on "Disconnect" on the page of this Tablet that does not work as a Leader, nothing happens.  On the other tablet that is setup as Leader, tapping on the Disconnect will exit the Leader mode on that tablet

9. I tried exiting the program and shutting down the tablet and restarting it and it is still not working

I believe the program must be saving some previous Connect Tablet settings for the connection somewhere that's why it is able to connect using the option "Connect With Last Used Settings" and I suspect that something there may be causing this issue as the Group Name should not be showing up as "Null" after I tap "OK" on the Leaders options page.

Is there a way to remove previous Connect Tablet settings that is stored for used with the "Connect With Last Used Settings" function as this may clear some of the connection issues I'm seeing on my tablet right now.

Hello, I can't connect to compagnion via usb, but I get a blah, blah, blah error message. On the other hand, there's no problem with wifi, except that I have to connect via mobilesheets using the connect to compagnion option. is this the right method? basically, the tablet isn't recognized via usb, even with the firewall and anti-virus turned off. I've tested the same problem on another computer.
Thanks for any help.

Xiaomi pad 6 tablet
Android 13

when ms is connected to my Helix Stomp via USB, so that I can send midi commands when changing songs, no annotation can be entered in the annotation field (edit notes) because the keyboard of my Samsung Tab 7 does not appear. Does anybody have the same problem?

Normally the Android status bar is hidden in MS, unless you swipe from the top or bottom of the screen to get it to temporarily appear. However, I find that if I unlock my Android tablet (S8 Pro) while MS is running, the Android status bar appears and never goes away, covering the MS buttons.

The status bar doesn't appear when viewing the score, but does appear in Edit mode and whenever any MS toolbars are shown.

I can get the status bar to go away again by going to the Android homescreen and back to MS, or by swiping down to open the notification shade, but it returns again if I sleep and unlock the tablet again.

Hy, I have a PDF with 3 "Links" in it and the links are working well with "ScreenTouch" and PT23-Bluetooth-Switch.

Now I tried to use "Links" in 2 other PDF - its not working - the program switches a side forward or backward and ignores the links.
PDF are native PDF and PDF printed as picture.

Lenovo Tab P12 - Android 13 /MobileSheets pro

What can I try?
What can be the difference in the PDF?

Thanks - Heiko.

Love this product - thanks for all the rich features ..  I have one tha t I'd like to suggest ... May sound a bit basic for advanced musicians. F some, this might be a cool Metronome feature. Give us an option for one of the sounds associated with setting a metronome count (Voice)to  "One and Two and Three and Four and" (in the case of 4/4).  

Thanks for listening.

Hello,
I am using MobileSheets version 3.8.10 on my Android 14.0. When I select Full Screen mode in the current song then click on "Apply to...", then "All songs in library", it only adjusts that song - subsequent ones still come up smaller.  It seems that the "Apply to... all songs in library" option from the 'Select Page Scaling Mode' window doesn't work. How can I make my choice of scaling the default for all?
Thanks in advance